Untitled Document

Full range of products for energy management and protection of feeding lines.

Energy Management
LineMANAGEMENT

SplitWAVE^®
An innovative system which consents, besides, the total protection of the power supply line, its automatic reset and the survey of a failure.

Energy Management
To reduce power consumption up to 50% with a photometric reduction of 35%.

LampMONITOR^®
To survey line loading with local or remote signalling.

SplitCOM^®
To transmit data detected by remote control systems and receive local or remote commands through telecommunication networks.

LineMANAGEMENT is made up of various devices which operate individually or jointly, locally or in remote.

The devices have also been planned for pre-existing electrical equipments, not being required load (i.e.: lamps) substitutions.

Electrical Equipment/Line Protection
LinePROTECTION
ResetFUSE^®

ResetFUSE^® is an innovative system, which enables:

Full protection of power feeding lines for Low Voltage and Low Safety Voltage (overcurrents, temporary overvoltages up to 1KW@1msec);
Automatic line reset after removal of anomalies due to breakdowns.
Automatic or manual resetting. Substitutes conventional fuses.

StandardRESET
ResetFUSE^® (standard restorable fuse). To restore the fuse after a breakdown, you must remove the obstacle and temporarily suspend the power supply from the line where it occurred.

RemoteRESET
ResetFUSE^® (remote-controlled restorable fuse). To restore the fuse after a failure, you must remove the obstacle and reset it with a remote-control.

AutoRESET
ResetFUSE^® (self-restorable fuse). After a breakdown, the fuse restores automatically, by individuating the physical removal of the failure on the line.

Electrical Equipment/Line Protection
LinePROTECTION
SurgeBLOCK™

SurgeBLOCK™
Devices that allow protection from temporary over-voltages on power feeding lines for Low Voltage and Safety Low Voltage systems.

SurgeBLOCK™ 3 kW
SurgeBLOCK™ protects power feeding lines against temporary over-voltages. Model for transient suppression up to 3KW@1msec on 24 VAC power lines.

SurgeBLOCK™ 10 kW
SurgeBLOCK™ protects power feeding lines against temporary over-voltages. Model for transient suppression to 10KW@1msec on 24 VAC power lines.

SurgeBLOCK™ xxx kW
SurgeBLOCK™. Custom transient suppression device (based on cutomer's specifications).

	Full range of products for energy management and protection of feeding lines.
	Energy Management LineMANAGEMENT SplitWAVE^® An innovative system which consents, besides, the total protection of the power supply line, its automatic reset and the survey of a failure. Energy Management To reduce power consumption up to 50% with a photometric reduction of 35%. LampMONITOR^® To survey line loading with local or remote signalling. SplitCOM^® To transmit data detected by remote control systems and receive local or remote commands through telecommunication networks. LineMANAGEMENT is made up of various devices which operate individually or jointly, locally or in remote. The devices have also been planned for pre-existing electrical equipments, not being required load (i.e.: lamps) substitutions.

	Electrical Equipment/Line Protection LinePROTECTION ResetFUSE^® ResetFUSE^® is an innovative system, which enables: Full protection of power feeding lines for Low Voltage and Low Safety Voltage (overcurrents, temporary overvoltages up to 1KW@1msec); Automatic line reset after removal of anomalies due to breakdowns. Automatic or manual resetting. Substitutes conventional fuses. StandardRESET ResetFUSE^® (standard restorable fuse). To restore the fuse after a breakdown, you must remove the obstacle and temporarily suspend the power supply from the line where it occurred. RemoteRESET ResetFUSE^® (remote-controlled restorable fuse). To restore the fuse after a failure, you must remove the obstacle and reset it with a remote-control. AutoRESET ResetFUSE^® (self-restorable fuse). After a breakdown, the fuse restores automatically, by individuating the physical removal of the failure on the line.
	Electrical Equipment/Line Protection LinePROTECTION SurgeBLOCK™ SurgeBLOCK™ Devices that allow protection from temporary over-voltages on power feeding lines for Low Voltage and Safety Low Voltage systems. SurgeBLOCK™ 3 kW SurgeBLOCK™ protects power feeding lines against temporary over-voltages. Model for transient suppression up to 3KW@1msec on 24 VAC power lines. SurgeBLOCK™ 10 kW SurgeBLOCK™ protects power feeding lines against temporary over-voltages. Model for transient suppression to 10KW@1msec on 24 VAC power lines. SurgeBLOCK™ xxx kW SurgeBLOCK™. Custom transient suppression device (based on cutomer's specifications).